Haltech NEXUS R5 + Plug and Pin Set

<div class="mt-3 mb-2"><strong>ECU OVERVIEW</strong></div>
<div>The Nexus R5 is Haltech's flagship product, combining the functionality of a power distribution module, data logger, dual-channel wideband controller, and a cutting-edge engine management system. This powerful unit is designed as a Vehicle Control Unit (VCU) to offer complete control for your performance and racing applications.</div>
<ul>
  <li><strong>4 x 25A (continuous) push-pull PWM capable outputs (5 kHz)</strong> for power to injectors, coils, transbrake, thermofan, fuel pump</li>
  <li><strong>12 x 8A (continuous) high side outputs</strong> (low-speed PWM, 200 Hz) for power to sensors, NOS solenoids, etc.</li>
  <li><strong>18 x peak/hold injector drivers</strong> (can be used as low side drive outputs)</li>
  <li><strong>12 x low current ignition outputs</strong> (can be used as low side drive outputs)</li>
  <li><strong>8 x low side drive outputs</strong> (PWM capable for DPOs)</li>
  <li><strong>4 x push-pull / H-bridge outputs</strong> (8A, PWM capable) for applications like electronic throttle control</li>
  <li><strong>23 x 0-5V analog inputs</strong> with redundancy for electronic throttle and switchable 5V pullup</li>
  <li><strong>Trigger and home inputs</strong> with differential inputs, adjustable thresholds, and glitch filters</li>
  <li><strong>10 x synchronous pulsed inputs</strong> (zero crossing or adjustable thresholds) for cam sensors, frequency inputs, or 0-5V analog inputs</li>
  <li><strong>2 x onboard wideband controllers</strong>, supporting NTK and LSU4.9</li>
  <li><strong>3 x CAN ports</strong> with switchable termination for connecting various devices</li>
  <li><strong>Plug and Pin Set</strong> - designed specifically for converting an existing loom to suit Nexus R5 applications</li>
</ul>